MMP22 Manually
Introduction
MMP22/30/45 is used to reshape irregular shape and size of metallographic sample which is difficult to hold so as to cut or polish the samples. Then to be tested and measured in metallographic photo or hardness test.
This machine is controlled by digital temperature controller and timer, after finishing mounting, it will turn off automatically.
It is the ideal equipments in the tertiary institutions, industrial’s laboratory.
This machine is controlled by digital temperature controller and timer, after finishing mounting, it will turn off automatically.
It is the ideal equipments in the tertiary institutions, industrial’s laboratory.
Specification
|
Model |
MMP22 |
MMP30 |
MMP45 |
|
Sample diameter |
Ø22x15mm |
Ø30x15mm |
Ø45x18mm |
|
Heater specifications |
220V, 650W |
||
|
Temperature setting range |
0-180℃ |
||
|
Power |
1P~220V,50Hz |
||
|
Dimension |
340x270x400mm |
||
|
Weight |
33 kg |
||
|
Accessory |
Heater, Mounting raw materials, hopper |
||
- Up Page：AMP 50 Automatically
- Next Page：MMP30 Manually