UE2405
Introduction
They are suitable for tensile, compression, bending, shearing and all other common material mechanical tests for metal and non-metal material for example steel, aluminum, copper, geotextile, plastic, rubber, thread, wood, alloy, PVC, spring, electrical wire and cable, composite, profiled bar, waterproof roll and all ASTM, ISO, JIS, DIN, BS, EN relative material mechanical testing standards
Accuracy And Calibration
The machine equips with high precision Load sensor, extensometer, encoder to get the test value. The accuracy can be reach to ±1% and±0.5% two degrees according to requirement. Servo Motor or Servo Hydraulic load system realized close loop control of full testing processing.
The machine is calibrated according to international norms requirement as ASTM E4, ASTM E83，ISO7500-1，ISO9513 and supply a full detailed calibration certificate.
Standard Accessories
Wedge Tension, Compression Plate, 3-Points bending accessories; Encoder installed; Load cell installed; Servo motor and controller built in; Extensometer; DSP PCI Control card; Installation tools; PC and Printer.
Features
Wedge Tension, Compression Plate, 3-Points bending accessories; Encoder installed; Load cell installed; Servo motor and controller built in; Extensometer; DSP PCI Control card; Installation tools; PC and Printer.
Features
※Double testing space and high rigidity structure,linear stroke make sure crossbeam accurate alignment，fully-enclosed testing space,well protect the operator’s safety；
※Equipped with mechanical limited switch, emergency stop switch,can protect accessaries and sensors；
※Driver system adopt high precision ball screw,transmission smoothly,improve the transmission efficiency and accuracy of displacement；
※Adopt PANASONIC servo motor drive,speed control of high precision,low noise；
※Adopt OMRON photoelectric encoder,small volum,high precision, reliable work；
※Adopt Celtron load cell to test the force,high resolutions；
※Speed control from 0.01 to 500mm/min (special 1000 mm/min) by servo motor；
※Large Extension and Digital gauge input channel for special test of deformation;
※Test process, result display, result analysis, result print, all the function can be controlled by the computer,testing data and curve can real-time display during test；
※Computer 3 close-loop control testing mode of load, deformation displacement；
※Various testing curves, Load-Time, Extension-Time, Stress-Strain, Load- Extension,ete. Can zoom and analysis at any point in the curve；
※Automatically calculate tensile strength, yield strength, modulus of elasticity, Rp0.2, Rt0.5；
※Support to change Excel format report, easy to pinpoint the location of the data；
※The same group sample can continuous testing, and can be analyzed separately for each test results；
※Can store testing result, testing curve and data；
※Have “Stop while destroy” function,system can automatic stop working when specimen is broken；
※Remote controller adjusts the machine crosshead before test and operate the test conveniently；
※Support different version of Microsoft windows OS of WinXP,Vista,Windows 7 and etc.
Specification
Specification
| Model | UE2401 | UE2402 | UE2405 | UE2410 | UE2420 | ||||||
| Maximum force(KN) | 1 | 2 | 5 | 10 | 20 | ||||||
| Machine type | Double | Double | Double | Double | Double | ||||||
| Accuracy | ≤±0.5% | ||||||||||
| Measuring range of force (KN) | 0.4%--100%F.S | ||||||||||
| Resolution of force | 1/300000 of maximum force | ||||||||||
| Accuracy of displacement measuring | ±0.5% | ||||||||||
| Resolution of displacement | 0.1 μm | ||||||||||
| Accuracy of deformation measuring | ±0.5% | ||||||||||
| Speed range of displacement control | 0.01-500mm/min (Max 1000mm/min as special order) | ||||||||||
| Speed range of force control | 0.005-5% F.S / S | ||||||||||
| Speed range of deformation control | 0.005-5% F.S/S | ||||||||||
| Range of constant displacement, force and deformation | 0.5%-100% F.S | ||||||||||
| Speed controlling accuracy | ≦±1.0% of the set value | ||||||||||
| Valid tension testing space(mm) | 800 | 800 | 800 | 800 | 800 | ||||||
| Compression testing space(mm) | 900 | 900 | 900 | 900 | 900 | ||||||
| Valid width between columns(mm) | 400 | 400 | 400 | 400 | 400 | ||||||
|
Tension Sample Clamping (mm) |
Flat grips | 0～14 | 0～14 | 0～14 | 0～14 | 0～14 | |||||
| Round grips | Ø4～14 | Ø4～14 | Ø4～14 | Ø4～14 | Ø4～14 | ||||||
| Power supply | 1P~220V, 1-3 kW, 50/60Hz | ||||||||||