XNR-400D
Introduction
The Melt Flow Indexer is designed according to ISO1133, ASTM D1238 and ASTM D3364.
It is suitable for determining the MVR and MFR of thermoplastic. Not only can which has low melt temperature.
It has been widely used in testing the high melt temperature such as PC, Fluor plastics and nylon, PE, PP, POM,PS,ABS resin plastics.
It is suitable for determining the MVR and MFR of thermoplastic. Not only can which has low melt temperature.
It has been widely used in testing the high melt temperature such as PC, Fluor plastics and nylon, PE, PP, POM,PS,ABS resin plastics.
Specification
|
Model |
XNR-400D |
|
Temperature range |
Room temperature~400℃ |
|
Temperature accuracy |
±0.5℃ |
|
Resolution ratio |
0.1℃ |
|
7 load level |
Calibrated loads are to total value stamped on weight with correct piston (0.325kg,1.2kg, 2.16kg, 3.8kg. 5.0kg, 10.00kg, 21.6kg) |
|
Diameter of mould |
Ø2.095±0.005mm |
|
Length of mould |
8.000±0.025mm |
|
Length of the drum |
160mm |
|
Power |
1P~220V，50/60HZ |
|
Net weight |
30kg |
- Up Page：None
- Next Page：None