laryee Logo

Helmet Testing Machine

Tracking Point Table
The device is used to draw test lines and impact points on the helmet. As an aid, it helps to carry out accurate and convenient helmets safety tests.......
Head Form
This type of head form for testing protective helmets, helmets can be used for many test applications, such as the following wear system strength test, helmets puncture, wearing stability testing and so on. Different forms are available according to J......
Vertical And Horizontal Field Of Vision Gauge
Vertical and horizontal field of vision gauge comply with GB811-2010、EN13087-6:2000、ECE R22 and JIS T8133:2007 standards. It is a primary test equipment for helmet industries, quality testing company, quality inspection department, R&D departm......
Helmet Visor Impact Testing Machine
Introduction The equipment is used to detect the penetration resistance of the motorcycle helmet goggles.Design and manufacture conform to GB811: 2010 、 QCVN02:2008/BKHCN、EN 13087:2000 and ECE R22 standards. It is widely used in the domestic and......
Helmet Roll Off Testing Machine
Introduction The device is used to test the wear stability of the helmet. It is composed of a frame, a heavy hammer, a guiding mechanism, steel wire and head form, conformity with GB811: 2010、QCVN 02:2008/BKHCN、ECE R22 and EN 13087: 2000 standards......
Static Chin Strap Testing Machine
Introduction The equipment is mainly used to test the tensile strength performance of the helmet strap, and can control and measure the loading and displacement in the test. Conform to standard EN13087, GB811: 2010 and QCVN 02: 2008/BKHCN. It is widel......
Helmet Pentration Testing Machine
The equipment is used to test the anti penetration ability of the motorcycle helmet. This machine is in conformity with the GB 811: 2010、QCVN 02:2008/BKHCN、EN13087: 2000 and JIS T8133:2007standards, at same time other testing standard can be fulfi......